Plant engineering and construction

At the combined heat and power plant in central Salzburg, an anti-icing system is installed to heat the air inlet duct of the gas turbine. For this purpose, KELAG AG has planned and delivered the turning and heating unit for the heat carrier water / ethylene glycol. Component engineering and construction began in early October, 2001. The unit was ready for delivery in mid-January, 2002.

Complete production of the modules, installation and a test run at our factory.

Complete production of the modules, installation and a test run at our factory.

Oil tack with a receptacle for Flender gearboxes and double oil coolers.

Complete production of the modules, installation and a test run at our factory.

Compressor skid to seal the nitrogen which is used to rinse pipelines and plants in the petrochemical industry.

Oil module with 2 x lubricating oil and 2 x emergency oil pump. 5 x jacking lube oil pumps. The tank is the size of a small single-family home. These lubricating oil plant supplies all bearings of the world record turbine (1750MW-capacity) at the Olkiluoto3 nuclear power plant Finland. Transport is via Basle, Rotterdam.

Oil module L including Pipe bundle cooler to supply the turbine bearings with lubricating and jacking oil. Consisting of a tank (oil reservoir) equipped with main and emergency oil pumps to operate the turbine. In addition, two jack oil pumps are installed to supply the turbine rotor with oil when starting. A separate oil cleaning plant also ensures high-quality oil in the bearings.

Oil module S including Pipe bundle cooler to supply the turbine bearings of a steam turbine with lubricating and jacking oil. Consisting of a tank (oil reservoir) equipped with main and emergency oil pumps to operate the turbine. In addition, two jack oil pumps are installed to supply the turbine rotor with oil when starting. It is ensured with an integrated filter system that oil used is free of contamination from the turbine. The oil quantity is in a cycle and is returned back to the tank.

Lubrication oil supply units for compressors consisting of: base frame, tank, pumps, cooler, filter and piping.

Successor for tunnel drills for the Gotthard Basic Tunnel (Alptransit manufacture and installation of 2 successors for tunnel drills). These drills are used for the creation of the Gotthard Basic Tunnel in Amsteg (world's largest railroad tunnel [57km]). The total weight of the steel structure is approx. 260 tons.

Lubricating oil unit with 2 lubricating oil pumps, an emergency oil pump and 3 jack oil pumps including double filter and plate heat exchanger: Tank volume 40,000 litres for lubricating oil ISO VG 46.

Pipe work pump stations "Scansinas und Nagens" and other adjustment work at other pump stations.

For the compressors of a HD-polyethylene plant in Aliaga/Turkey, KELAG AG planned and delivered three lubricating oil supply units. The three skids were engineered at the same time using a 3D-CAD model generated at KELAG and were completed in a throughput time of 18 weeks.

Grabs and Buchs level pump station for both water supplies

The water power plant is divided into the West plant and the East plant. The West plant has two Francis turbines and a transformer; the East plan has two Francis turbines and two transformers.